LCDproc development and user support list

Text archives Help


[Lcdproc] OpenBSD glcd (Cannot load specified object)


Chronological Thread 
  • From: harald at ccbib.org (Harald Geyer)
  • Subject: [Lcdproc] OpenBSD glcd (Cannot load specified object)
  • Date: Sun, 21 Feb 2016 14:36:02 +0100

Hi Brendan,

Brendan Horan writes:
>
> I then configure LCDd.conf driver to "glcd" etc..
> Then I try run the server like this "LCDd -r5 -f
> -c /etc/LCDd.conf" I get the following error :
> ------------------------------------------------------------------------
> ---------- driver_load(name="glcd", filename="server/drivers/glcd.so")
> Could not open driver module server/drivers/glcd.so: Cannot
> load specified object Driver [glcd] binding failed Module
> server/drivers/glcd.so could not be loaded Could not load driver glcd
> There is no output driver Critical error while initializing, abort.
> ------------------------------------------------------------------------

Hm, you are using a relativ path. You are sure you run LCDd from the
right directory?


Otherwise this is a strange problem. I'd recommend to use strace to
see which call actually fails ...

HTH,
Harald

--
If you want to support my work:
see http://friends.ccbib.org/harald/supporting/
or donate via peercoin to P98LRdhit3gZbHDBe7ta5jtXrMJUms4p7w
or bitcoin 1FUtd8T9jRN1rFz63vZz7s2fDtB6d6A7aS




Archive powered by MHonArc 2.6.18.

Top of page