LCDproc development and user support list

Text archives Help


[Lcdproc] Antec Fusion Black ffdc LCD device


Chronological Thread 
  • From: bsdfan at nurfuerspam.de (Markus Dolze)
  • Subject: [Lcdproc] Antec Fusion Black ffdc LCD device
  • Date: Mon, 23 Feb 2009 17:26:11 +0100

-------- Original-Nachricht --------
> Datum: Mon, 23 Feb 2009 11:04:57 -0500
> Von: "David Scott" <multiroom at sympatico.ca>
> An: lcdproc at lists.omnipotent.net
> Betreff: [Lcdproc] Antec Fusion Black ffdc LCD device

>
> Hey all,
>
> I have a couple questions about the LCD's backlight in this chassis.
> LCDproc-0.5.2 works perfectly with the latest patches only for the
> backlight. Now I notice in the LCDd.conf file the driver section for
> [imonlcd] list exit=2 which is I assume why the Backlight shuts off when
> shutting down temporarily (this does not happen in suspend) So I guess the
> way I see this is lcdproc is removing power to the LCD while shutting down
> and controlling it but as soon as lcdproc is closed Antec takes over and
> resumes sending power to the lcd's backlight. Then there is the option
> under
> the driver section to set the Backlight to 0 or 1 (on or Off) but this
> completely turns off the backlight which is really not a good choice. I
> have
> not played with any variation of the master backlight setting and the
> drivers setting and that may help in some way as well, I currently have
> the
> master set to open for XBMC to dim it.
>
> So is there some way that the exit=2 could hold the lcd until lcdproc
> send
> the wakeup 8 command to the lcd on reboot, I am not sure how this would
> happen outside of lcdproc running but someone more qualified then I may be
> able to answer the question.
>
> Thanks,
>
> Dave
>

Hi,

what patches are you using LCDproc 0.5.2 with? Where did you get them from?
There is no [imonlcd] section in LCDd.conf and there is no 'exit=2'.

Regards,
Markus




Archive powered by MHonArc 2.6.18.

Top of page