LCDproc development and user support list

Text archives Help


[Lcdproc] Re: changes in CVS: HD44780 shake-up, ConnectionType mplay


Chronological Thread 
  • From: peter AT adpm.de (Peter Marschall)
  • Subject: [Lcdproc] Re: changes in CVS: HD44780 shake-up, ConnectionType mplay
  • Date: Sun Nov 18 10:37:03 2007

Hi Andrew,

On Friday, 16. November 2007, Andrew May wrote:
> On Sun, 11 Nov 2007 16:09:44 +0100
> Ok I finally did a cvs update, built it and put on there.
> I use to have the speed/bitrate set to 0, for autodetect, but that
> didn't work. I changed it 38400 and it started up ok. And it seems to
> be working ok. I am getting the "output states changed" dumped out to
> my syslog a lot. So I am not sure about that.
>
> Nov 15 20:22:35 fable2 LCDd: LCDd version 0.5dev starting
> Nov 15 20:22:35 fable2 LCDd: Using Configuration File: /etc/LCDd.conf
> Nov 15 20:22:35 fable2 LCDd: Listening for queries on 127.0.0.1:13666
> Nov 15 20:22:35 fable2 LCDd: HD44780: lis2: invalid configured bitrate
> speed Nov 15 20:22:35 fable2 LCDd: Driver [hd44780] init failed, return
> code < 0 Nov 15 20:22:35 fable2 LCDd: Could not load driver hd44780
> Nov 15 20:22:35 fable2 LCDd: There is no output driver
> Nov 15 20:22:35 fable2 LCDd: Critical error while initializing, abort.
> Nov 15 20:24:11 fable2 ntpd[5267]: adjusting local clock by 55.498245s
> Nov 15 20:25:20 fable2 LCDd: LCDd version 0.5dev starting
> Nov 15 20:25:20 fable2 LCDd: Using Configuration File: /etc/LCDd.conf
> Nov 15 20:25:20 fable2 LCDd: Listening for queries on 127.0.0.1:13666
> Nov 15 20:25:25 fable2 LCDd: Connect from host 127.0.0.1:48147 on socket 6
> Nov 15 20:25:26 fable2 LCDd: output states changed
> Nov 15 20:25:56 fable2 last message repeated 3 times
> Nov 15 20:26:56 fable2 last message repeated 6 times
> Nov 15 20:27:36 fable2 last message repeated 4 times

It's good to hear the driver works for you.

The "output state changed" message is a harmelss informational message
that occurs with ReportLevel=3 and higher.
Reducing ReportLevel to 2 or lower should solve the issue.

Thanks for reporting back
Peter

--
Peter Marschall
peter AT adpm.de



  • [Lcdproc] Re: changes in CVS: HD44780 shake-up, ConnectionType mplay, Peter Marschall, 11/18/2007

Archive powered by MHonArc 2.6.18.

Top of page