LCDproc development and user support list

Text archives Help


[Lcdproc] GLK driver and a "GLK12232-25-SM" matrix orbital display


Chronological Thread 
  • From: peter AT kahn.nu (Peter Andersson)
  • Subject: [Lcdproc] GLK driver and a "GLK12232-25-SM" matrix orbital display
  • Date: Fri Apr 27 10:21:02 2007

Perhaps i should mention that my display is connected via serial port
(/dev/ttyS0), just in case that might be the cause of my problems...

/Peter

> Thanks for the quick reply. When compiling lcdproc with
> "--enable-seamless-hbars=no/--disable-seamless-hbars"
> i still don't get any bargraphs except for ascii ones like "---- ".
> Where there should be bargraphs i get something like this: " ||0". The
> good thing is that the backlight doesn't get turend on and off all the
> time
>
> When compiling with "--enable-seamless-hbars" i get the same errors as
> before, and bargraphs still get displayed like " ||0".
>
> Thanks again for helping me out. Let me know if you have any other ideas.
>
> /Peter
>
>> Peter Andersson schrieb:
>>> 2). The display doesn't display any bargraphs at all.
>>
>> Please try changing the "seamless-hbars" configure parameter.
>>
>> Robert
>>
>>
>
> _______________________________________________
> LCDproc mailing list
> LCDproc AT lists.omnipotent.net
> http://lists.omnipotent.net/mailman/listinfo/lcdproc
>
>





Archive powered by MHonArc 2.6.18.

Top of page