LCDproc development and user support list

Text archives Help


[Lcdproc] Problems with Matrix Orbital LK202-24-USB


Chronological Thread 
  • From: darren AT boncey.org (Darren Greaves)
  • Subject: [Lcdproc] Problems with Matrix Orbital LK202-24-USB
  • Date: Thu Oct 28 15:13:01 2004

OK, done that, here is my output:

do_mainloop()
sock_poll_clients()
parse_all_client_messages()
drivers_getkey()
driver->getkey 0x8068280
driver_getkey returns char 0 ('')
screenlist_current:
MtxOrb: asked to clear screen
MtxOrb: backlight turned on
MtxOrb: output pins set: 0000
MtxOrb: printed string at (0,0)
MtxOrb: printed string at (0,1)
MtxOrb: written character 07 to position (19,0)
MtxOrb: frame buffer flushed
MtxOrb: frame buffer flushed
Screen->Client List has timeout->-1
sock_poll_clients()
parse_all_client_messages()
drivers_getkey()
driver->getkey 0x8068280
driver_getkey returns char 0 ('')
screenlist_current:
MtxOrb: asked to clear screen
MtxOrb: printed string at (0,0)
MtxOrb: printed string at (0,1)
MtxOrb: written character 07 to position (19,0)
MtxOrb: frame buffer flushed
MtxOrb: frame buffer flushed
Screen->Client List has timeout->-1
sock_poll_clients()
parse_all_client_messages()
drivers_getkey()
driver->getkey 0x8068280
driver_getkey returns char 0 ('')
screenlist_current:
MtxOrb: asked to clear screen
MtxOrb: printed string at (0,0)
MtxOrb: printed string at (0,1)
MtxOrb: written character 07 to position (19,0)
MtxOrb: frame buffer flushed
MtxOrb: frame buffer flushed
Screen->Client List has timeout->-1
sock_poll_clients()
parse_all_client_messages()
drivers_getkey()
driver->getkey 0x8068280
driver_getkey returns char 0 ('')
screenlist_current:
MtxOrb: asked to clear screen
MtxOrb: printed string at (0,0)
MtxOrb: printed string at (0,1)
MtxOrb: written character 07 to position (19,0)

And then it hangs.


On Thu, Oct 28, 2004 at 04:06:01PM +0100, Chris Lansley wrote:
>
> BTW - using the option "--enable-debug" to configure and rebuilding, gives
> a lot more debug output.
>
>
> > -----Original Message-----
> > From:
> > lcdproc-admin AT lists.omnipotent.net
> > [mailto:lcdproc-admin AT lists.omnipotent.net]On
> > Behalf Of Chris Lansley
> > Sent: 28 October 2004 15:49
> > To: Darren Greaves;
> > lcdproc AT lists.omnipotent.net
> > Subject: RE: [Lcdproc] Problems with Matrix Orbital LK202-24-USB
> >
> >
> >
> > Around the point that yours hangs - I get this debug message:
> >
> > sock_poll_clients: Connect from host 127.0.0.1:35599 on #5
> > drivers_getkey()
> > Screen->Client List has timeout->-1
> > read_from_client()
> > read_from_client()
> > ...
> >
> > So it seems your client isn't even connecting. [Assuming you ran one!]
> >
> > Try using telnet (telnet localhost 13666) to connect to see if the
> > client message appears in that case. [typing stuff into telnet should
> > cause it to issue a message like 'huh? Invalid command "fsf"']
> >
> > Chris.
> >
>
> _______________________________________________
> LCDproc mailing list
> LCDproc AT lists.omnipotent.net
> http://lists.omnipotent.net/mailman/listinfo/lcdproc
>




Archive powered by MHonArc 2.6.18.

Top of page