LCDproc development and user support list

Text archives Help


[Lcdproc] re: LCDProc


Chronological Thread 
  • From: projects AT webBastards.com (Wayne Wylupski)
  • Subject: [Lcdproc] re: LCDProc
  • Date: Sun Jul 6 18:20:01 2003

A lot of information comes with LCDproc already; start with the README &
INSTALL; the latter will help you. Lately we've been recommending the
following document: http://catb.org/~esr/faqs/smart-questions.html

Wayne

----- Original Message -----
From: "Brian Walker"
<bwalk AT telus.net>
To: "Wayne Wylupski"
<projects AT webBastards.com>
Sent: Saturday, July 05, 2003 9:40 PM
Subject: Re: [Lcdproc] re: LCDProc


> ./configure
> heh
> am i supposed to ./configure -with-MtxOrb
> ?
> On Sat, 2003-07-05 at 17:44, Wayne Wylupski wrote:
> > Since you're using a serial device the kernel does come into play --
unless
> > you did not compile serial support into the kernel. I was referring to
the
> > LCD "driver" which you supposed to select when you run the ./configure
> > command. Do you remember what your ./configure line was?
> >
> > My guess is that you have bad settings in your LCD.conf file, but you'd
have
> > to share for us to know for sure.
> >
> > Wayne
> >
> > ----- Original Message -----
> > From: "Brian Walker"
> > <bwalk AT telus.net>
> > To: "Wayne Wylupski"
> > <projects AT webBastards.com>
> > Sent: Saturday, July 05, 2003 8:36 PM
> > Subject: Re: [Lcdproc] re: LCDProc
> >
> >
> > > k well i was unaware what to do about the driver side of
> > > things...perhaps you could help?
> > > where do i find the driver in the kernel?
> > >
> > >
> > > On Sat, 2003-07-05 at 14:18, Wayne Wylupski wrote:
> > > > There isn't a lot of information here for us to help. What version
of
> > > > LCDproc are you using? What does your LCDd.conf look like? Do you
have
> > the
> > > > correct driver compiled and selected?
> > > >
> > > > I have an LCD2041 so I can actually test some things out.
> > > >
> > > > Wayne
> > > >
> > > > ----- Original Message -----
> > > > From: "Brian Walker (by way of Guillaume Filion)"
> > > > <bwalk AT telus.net>
> > > > To: "LCDproc Mailing List"
> > > > <lcdproc AT lists.omnipotent.net>
> > > > Sent: Saturday, July 05, 2003 8:53 AM
> > > > Subject: [Lcdproc] re: LCDProc
> > > >
> > > >
> > > > > I have a Matrix Orbital LCD2041-WB
> > > > > this unit works in windows but im unsure how to install it with
linux
> > > > > (using 2.4.20 kernel and slackware 8.1)
> > > > > lcd proc and the server communicate perfectly, however, all i have
on
> > > > > the LCD module is a blinking cursor
> > > > > please get back to me ASAP
> > > > > thanks
> > > > >
> > > > >
> > > > > --
> > > > > Brian Walker
> > > > > (bwalk AT telus.net)
> > > > > _______________________________________________
> > > > > LCDproc mailing list
> > > > > LCDproc AT lists.omnipotent.net
> > > > > http://lists.omnipotent.net/mailman/listinfo/lcdproc
> > > > >
> > > > >
> > > >
> > > --
> > > Brian Walker
> > > (bwalk AT telus.net)
> > >
> > >
> >
> --
> Brian Walker
> (bwalk AT telus.net)
>
>





Archive powered by MHonArc 2.6.18.

Top of page